• June 03, 2021

At present, more than 80% of copper in the world is made by fire method, and it is mainly used to process copper sulfide ore. Pyrometallurgy is to melt copper ore (or calcine, agglomerate, etc.) and flux at high temperature, or directly smelt into blister copper, or first smelt into matte (melt mainly composed of copper, iron and sulfur) Then smelt into blister copper. Except for some operations (...

• June 30, 2021

When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. Most of the water in the market belongs to the hard pipe, so you should pay attention to the height of the upper spout. It is most suitable to go down from the basin to 35 work points. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold wat...

• July 20, 2021

The valve body is one of the main parts of the valve; there are different mechanical manufacturing methods according to the pressure level. For example: casting, forging, etc. The definition of "valve" is a device used to control the direction, pressure, and flow of fluid in a fluid system. A valve is a device that allows the medium (liquid, gas, powder) in the piping and equipment to flow or stop...

• August 24, 2021

SS304 is better. There are several reasons below that: 1.The hardness of stainless steel faucet is higher than that of all-copper. The service life of stainless steel faucet is longer than that of all-copper faucet. It does not need to change the faucet frequently, which is more environmentally friendly. 2.Stainless steel faucets do not contain lead, are resistant to acid and alkali, and are not e...

• October 19, 2021

50kg Ball Sand Mixer is a small-sized spherical sand mixing device with a spherical rotating throwing and falling back type. It is used for gravity casting or mixing of small and large batches of core sand. Its working principle is to quickly mix quartz sand, curing agent, and resin into casting core sand. Through the core-making equipment, high-quality sand cores with smooth surface, small gas ge...

• November 09, 2021

Abrasive Belt Polishing Machine This equipment is widely used in plumbing and bathroom brass casting, door control hardware, fire hydrants, auto parts and other appearance intelligent and efficient polishing and polishing. Novel design, simple operation, intelligent and efficient production. Belt grinding is a kind of elastic grinding, so belt grinding is a composite processing technology with mul...

• November 15, 2021

1. Structure difference: CNC machining center is controlled by at least three axes, while CNC lathe is controlled by two axes. 2. Tool difference: CNC machining center has a tool magazine, and CNC lathe uses a tool post. There are more classifications of CNC machining center tool holders than CNC lathe tool holders, such as disc type, hat type, chain type, flying saucer type, simultaneous movement...

• November 23, 2021

Injection molding machine is also known as injection molding machine or injection machine. It is the main molding equipment for making thermoplastic or thermosetting materials into various shapes of plastic products using plastic molding molds. According to the arrangement of the injection device and the clamping device, the injection molding machine can be divided into vertical, horizontal and ve...