• October 19, 2021

50kg Ball Sand Mixer is a small-sized spherical sand mixing device with a spherical rotating throwing and falling back type. It is used for gravity casting or mixing of small and large batches of core sand. Its working principle is to quickly mix quartz sand, curing agent, and resin into casting core sand. Through the core-making equipment, high-quality sand cores with smooth surface, small gas ge...

• April 26, 2022

Primary maintenance This type of maintenance refers to the operation of the equipment for one month (two shifts), mainly by operators, and maintenance workers cooperate with each other for maintenance. Its contents are: "Take off the yellow robe", "clean the internal organs", and its main work contents are: checking, cleaning, and adjusting the electrical control parts; thoroughly cleaning and wip...

• May 11, 2022

Centrifugal dewatering machine is mainly composed of transfer and screw conveyor with hollow shaft. After the sludge is sent into the drum by the hollow shaft, it is immediately thrown into the hub cavity under the action of centrifugal force generated by high-speed rotation. The specific gravity of the sludge particles is large, so the centrifugal force generated is also large, and they are throw...

• June 13, 2022

PVC ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for fluid regulation and control. Compared with other valves, it has the following advantages. 1. The fluid resistance is small. The ball valve has the smallest fluid resistance among all valves. Even the reduced diameter ball valve has a relatively small fluid resistance. The UPVC ball valve is a ...

• September 06, 2022

The slotting machine is mainly used for asphalt and cement pavement repair, drainage water pipes, gas pipes, electric wire pipes and optical cable pipes. The pavement is quickly cut into uniform grooves by the roulette saw to form new joint surfaces. Optimize the contact level between the filling material and the slot, and strengthen the tightness of the bonding between the filling material and th...

• September 19, 2022

Production of faucets Copper ingots→dissolving→casting (low-grade sand casting, high-quality faucet gravity casting)→post-casting cleaning→casting inspection→machining→tolerance inspection→grinding→surface inspection→electroplating→plating inspection→assembly→pressure test→ Finished product inspection → packaging → delivery. Casting: low-grade castings are cast by sand casting, high-quality faucet...

• October 08, 2022

The rewinding machine is the fastest machine in papermaking machinery. Its speed is 1500 ~ 1800m/min, and the highest speed is over 3000m/min. So how does it work? What are the requirements for the craft? Rewinding machine according to the different properties of the paper can be divided into: shaft winding machine and non-shaft winding machine; According to the different transmission mode can be ...

• January 11, 2023

Processing steps of faucet cartridge: One: precision casting cartridge. Two: machine tool processing. Three: Assembly version of the rubber ring and plastic parts. Common faucet spools have steel ball cartridges and ceramic spools. The steel ball cartridge has good pressure resistance, but the disadvantage is that the rubber sealing ring that acts as a seal is easy to wear and age quickly. Compare...