• January 26, 2021

Traditional faucets are made of brass. The process flow is as follows: copper ingot→dissolving→casting→cleaning after casting→casting inspection→machining→tolerance inspection→grinding→surface inspection→plating→plating inspection→assembly→pressure test→ Finished product inspection → packaging → delivery. There are a total of 16 processes, and each process is strictly controlled to ensure quality....

• June 30, 2021

When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. Most of the water in the market belongs to the hard pipe, so you should pay attention to the height of the upper spout. It is most suitable to go down from the basin to 35 work points. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold wat...

• August 24, 2021

SS304 is better. There are several reasons below that: 1.The hardness of stainless steel faucet is higher than that of all-copper. The service life of stainless steel faucet is longer than that of all-copper faucet. It does not need to change the faucet frequently, which is more environmentally friendly. 2.Stainless steel faucets do not contain lead, are resistant to acid and alkali, and are not e...

• October 19, 2021

50kg Ball Sand Mixer is a small-sized spherical sand mixing device with a spherical rotating throwing and falling back type. It is used for gravity casting or mixing of small and large batches of core sand. Its working principle is to quickly mix quartz sand, curing agent, and resin into casting core sand. Through the core-making equipment, high-quality sand cores with smooth surface, small gas ge...

• November 15, 2021

1. Structure difference: CNC machining center is controlled by at least three axes, while CNC lathe is controlled by two axes. 2. Tool difference: CNC machining center has a tool magazine, and CNC lathe uses a tool post. There are more classifications of CNC machining center tool holders than CNC lathe tool holders, such as disc type, hat type, chain type, flying saucer type, simultaneous movement...

• April 26, 2022

Primary maintenance This type of maintenance refers to the operation of the equipment for one month (two shifts), mainly by operators, and maintenance workers cooperate with each other for maintenance. Its contents are: "Take off the yellow robe", "clean the internal organs", and its main work contents are: checking, cleaning, and adjusting the electrical control parts; thoroughly cleaning and wip...

• July 04, 2022

Drilling and tapping machine is a metal cutting machine tool, CNC machining equipment, similar in style and function to the machining center, but smaller than the machining center, with a general stroke of 500*400. Features The drilling and tapping machine has a super-large column that is stable and can be displaced at a high speed of 60m/min without deformation. Ultra-large span base, six-point s...

• August 22, 2022

Glass cutting machine refers to a processing machine specially used for glass processing and blanking. The glass cutting machine includes the air-floating arrangement feeding table at the beginning and the end, and the double-overpass cutting table. The first straight beam of the table and the direction of the straight beam and the length of the lower frame of the first straight beam and the fourt...