• January 26, 2021

Traditional faucets are made of brass. The process flow is as follows: copper ingot→dissolving→casting→cleaning after casting→casting inspection→machining→tolerance inspection→grinding→surface inspection→plating→plating inspection→assembly→pressure test→ Finished product inspection → packaging → delivery. There are a total of 16 processes, and each process is strictly controlled to ensure quality....

• June 30, 2021

When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. Most of the water in the market belongs to the hard pipe, so you should pay attention to the height of the upper spout. It is most suitable to go down from the basin to 35 work points. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold wat...

• August 24, 2021

SS304 is better. There are several reasons below that: 1.The hardness of stainless steel faucet is higher than that of all-copper. The service life of stainless steel faucet is longer than that of all-copper faucet. It does not need to change the faucet frequently, which is more environmentally friendly. 2.Stainless steel faucets do not contain lead, are resistant to acid and alkali, and are not e...

• October 19, 2021

50kg Ball Sand Mixer is a small-sized spherical sand mixing device with a spherical rotating throwing and falling back type. It is used for gravity casting or mixing of small and large batches of core sand. Its working principle is to quickly mix quartz sand, curing agent, and resin into casting core sand. Through the core-making equipment, high-quality sand cores with smooth surface, small gas ge...

• April 26, 2022

Primary maintenance This type of maintenance refers to the operation of the equipment for one month (two shifts), mainly by operators, and maintenance workers cooperate with each other for maintenance. Its contents are: "Take off the yellow robe", "clean the internal organs", and its main work contents are: checking, cleaning, and adjusting the electrical control parts; thoroughly cleaning and wip...

• September 19, 2022

Production of faucets Copper ingots→dissolving→casting (low-grade sand casting, high-quality faucet gravity casting)→post-casting cleaning→casting inspection→machining→tolerance inspection→grinding→surface inspection→electroplating→plating inspection→assembly→pressure test→ Finished product inspection → packaging → delivery. Casting: low-grade castings are cast by sand casting, high-quality faucet...

• January 11, 2023

Processing steps of faucet cartridge: One: precision casting cartridge. Two: machine tool processing. Three: Assembly version of the rubber ring and plastic parts. Common faucet spools have steel ball cartridges and ceramic spools. The steel ball cartridge has good pressure resistance, but the disadvantage is that the rubber sealing ring that acts as a seal is easy to wear and age quickly. Compare...

• February 09, 2023

1. What is machining It usually refers to the use of metal cutting lathes, milling, drilling, planing, grinding, boring and other machine tools to perform various cutting processes on the workpiece, so that the workpiece can achieve the required dimensional accuracy and shape position accuracy and meet the drawing requirements. 2. Lathe It refers to the machine tool that takes the rotation of the ...