• August 24, 2021

SS304 is better. There are several reasons below that: 1.The hardness of stainless steel faucet is higher than that of all-copper. The service life of stainless steel faucet is longer than that of all-copper faucet. It does not need to change the faucet frequently, which is more environmentally friendly. 2.Stainless steel faucets do not contain lead, are resistant to acid and alkali, and are not e...

• August 26, 2021

The fire sprinkler system is a kind of fire extinguishing device, and it is a kind of fixed fire protection facility that is widely used. It has the characteristics of low price and high fire extinguishing efficiency. According to different functions, it can be divided into two forms: manual control and automatic control. The system is equipped with an alarm device, which can automatically send an...

• September 27, 2021

Daily maintenance 1、Check the air cylinders, gas circuits and valves for leaks and eliminate them in time. 2、Clean the contact surfaces of moving parts at any time during work and add lubricating oil, such as guide sleeves and guide posts everywhere. 3、Lubricating oil filling cycle for the sliding sleeve and the lifting sliding sleeve of the box: every shift/time. 4、Frequently check whether the fa...

• October 11, 2021

Automatic Core Shooter Machine(conveyor belt. Protective cover) is a vertical parting, automatic, downward turning mold, conveyor belt conveying sand core, high environmental protection hot core box core shooting machine, it is suitable for valves, faucets, hardware The requirements of multiple types of sand cores for small and medium-sized work pieces in the parts, hydraulic and pneumatic industr...

• October 26, 2021

The automatic single-head core shooter (dry and wet sand, automatic core connection) is a horizontally divided, fully automatic operation hot core box core making equipment. It is suitable for the production of sand cores less than 3.5kg. Its principle is to inject the core sand mixture into the heated mold core box, and then take it out after hardening to a certain thickness, so as to obtain high...

• November 02, 2021

Water pressure testing machine,this testing equipment is designed and manufactured in accordance with the testing requirements of relevant testing standards, and is used for dry air pressure tightness testing of various types of faucets, faucets, pipe fittings and other shells. The dry air pressure tightness test is to pass the air pressure required for the test into the inner cavity of the produc...

• November 09, 2021

Abrasive Belt Polishing Machine This equipment is widely used in plumbing and bathroom brass casting, door control hardware, fire hydrants, auto parts and other appearance intelligent and efficient polishing and polishing. Novel design, simple operation, intelligent and efficient production. Belt grinding is a kind of elastic grinding, so belt grinding is a composite processing technology with mul...

• November 15, 2021

1. Structure difference: CNC machining center is controlled by at least three axes, while CNC lathe is controlled by two axes. 2. Tool difference: CNC machining center has a tool magazine, and CNC lathe uses a tool post. There are more classifications of CNC machining center tool holders than CNC lathe tool holders, such as disc type, hat type, chain type, flying saucer type, simultaneous movement...