Tap Valves Life Cycle Tester

Fire Hose Abrasion Resistance Tester The Equipment is used for the abrasion resistance test of the fire hose

Fire Rotary Joint Seal & Strength Tester The Equipment is used for hyraulic seal and strength test of the fire rotary joint.

Salt Spray Test Machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. 

Hot & Cold Pressured Water Testing Machine This equipment providing hot and cold pressured water to test life cycle of plumbing fittings such as shower heads ,hand-held showers and ball joint.

Water Block Accessories Flux and Seal Testing Machine The Device is used to test inlet valvae flow rate,static/dynamic pressure seal,re-open function,resistance to water pressure,drainage valve flow rate,seal,water capacity,residual water level,driving force.

Seals and Burst Pressure Tester This Device is used to test the faucets,horses,spray gun,valves and other plumbing products,hydrostatic pressure seal strength properties.

QZC-32 is automatic drill hole machine is very efficiency , after cutting from brass cutting machine, can drill the hole by this machine .Economical Brass Bar Cutting Machine,Automatic Cutting Machine.

Angle Cutting Machine No burrs and dust, bilateral two-way clamp the balance of work piece, cut smooth without burrs, saw blades, low noise and low pollution. Accurate/ fast/smooth, accurate cutting precision and speed of more than one band saw and bow saw, edge smooth not fever at the same time, save the secondary processing. Oblique cutting and milling groove, the nose can be adjusted for oblique cutting and milling groove, Angle accurately, perfect pipe interface and save work. Help auxiliary cooling circulating cooling system, has a large capacity storage barrel, ensure the life of saw blade section is flat and level.