• September 14, 2020

When looking for a kitchen faucet, what are the primary features you need to consider? Can you choose a faucet finish that is as unique as the rest of your kitchen design? 1. Choose Your Location-It would decide whether you need sink-mount, deck-mount or a wall-mount kitchen faucet. 2. Finishes-Choosing a colored finish can define the look of your kitchen and coordinate or contrast other kitchen f...

• October 09, 2020

Machining is manufacturing process that involves removing materials using cutting tools for getting rid of the unwanted materials from some workpiece and converting it into the shape you desire. A large piece of stock is used for cutting the workpiece. The large stock might be in any shape such as solid bar, flat sheet, beam or even hollow tubes. The process can also be performed on some existing ...

• October 27, 2020

PTFE is widely used in a variety of needs, such as: anti-acid and organic solvents, which itself has no toxic to people, but one of the raw materials used in the production process of ammonium perfluorooctanoate (PFOA) is considered likely to have a carcinogenic effect. So PTFE TAPE machine is very important for us. Our engaged in manufacturing PTFE polymer tape machine, which also called as PTFE ...

• November 05, 2020

Valves are essential parts of any piping system used to control the flow and pressure of contents, whether that is oil, gas, liquid, or vapors.We are talkimg about the ball valve here. A ball valve is a quarter-turn rotational motion valve that used a ball-shaped disk to control a flow. If the valve is opened, the holes in the ball stay in line with the body inlet allowing contents to pass. Ball v...

• January 06, 2021

Drilling machines and tapping machines are made with a variety of specifications and function in several ways. In modern drilling and tapping machines, the surface to be drilled is either kept on a drill press table or a drill press vise. For drilling in a round shaft, a drill press vise is used while a drill press table is used for a shaft with a planar base. The speed of drills can be 5 to 6 m/m...

• January 20, 2021

Brass bars are rod-shaped objects made of copper and zinc alloys. They are named for their yellow color. Brass has good mechanical and wearing resistance, and can be used to manufacture precision instruments, ship parts, shell of guns, etc. Our machine could cut many kinds of products. DN32,DN50,DN60 etc. More information, welcome to contact D&S Automatic Co.,Ltd.

• March 09, 2021

PTFE tapes are all professionally used. Non-professionals often encounter similar problems when using them, such as: how to wrap it? How many turns can be wound firmly without leaking?  In fact, how to use it correctly is often taken carelessly by people as a minor issue, but "thousands of miles of dams, destroyed by ant dens", home improvement is no small matter, and the decoration is c...

• March 17, 2021

The core shooter uses coated sand to make the core, which is suitable for both hot core boxes and cold core boxes. The core shooting machine is characterized by the use of two guide posts to open and close the mold vertically, and install two different molds at the same time. The fixed mold can be installed on both sides of the middle fixed frame, and the mold can be opened and closed (equivalent ...