• August 24, 2021

SS304 is better. There are several reasons below that: 1.The hardness of stainless steel faucet is higher than that of all-copper. The service life of stainless steel faucet is longer than that of all-copper faucet. It does not need to change the faucet frequently, which is more environmentally friendly. 2.Stainless steel faucets do not contain lead, are resistant to acid and alkali, and are not e...

• September 27, 2021

Daily maintenance 1、Check the air cylinders, gas circuits and valves for leaks and eliminate them in time. 2、Clean the contact surfaces of moving parts at any time during work and add lubricating oil, such as guide sleeves and guide posts everywhere. 3、Lubricating oil filling cycle for the sliding sleeve and the lifting sliding sleeve of the box: every shift/time. 4、Frequently check whether the fa...

• October 19, 2021

50kg Ball Sand Mixer is a small-sized spherical sand mixing device with a spherical rotating throwing and falling back type. It is used for gravity casting or mixing of small and large batches of core sand. Its working principle is to quickly mix quartz sand, curing agent, and resin into casting core sand. Through the core-making equipment, high-quality sand cores with smooth surface, small gas ge...

• November 09, 2021

Abrasive Belt Polishing Machine This equipment is widely used in plumbing and bathroom brass casting, door control hardware, fire hydrants, auto parts and other appearance intelligent and efficient polishing and polishing. Novel design, simple operation, intelligent and efficient production. Belt grinding is a kind of elastic grinding, so belt grinding is a composite processing technology with mul...

• November 23, 2021

Injection molding machine is also known as injection molding machine or injection machine. It is the main molding equipment for making thermoplastic or thermosetting materials into various shapes of plastic products using plastic molding molds. According to the arrangement of the injection device and the clamping device, the injection molding machine can be divided into vertical, horizontal and ve...

• November 30, 2021

The working principle of the injection molding machine is similar to the syringe used for injection. It uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten state (that is, the viscous fluid state) into the closed mold cavity. The process of obtaining the product after curing and shaping. Injection molding is a cyclic process, each cycle mainly includes: quanti...

• December 09, 2021

The brass rod automatic cutting machine is one of the main equipment produced by our factory. The feeding and feeding actions of this model are completed by the speed-regulating motor driving the corresponding mechanical parts. The feeding motor is controlled by the frequency converter. The intensity can be easily controlled. When the machine is automatically running and cutting, it will perform c...

• March 14, 2022

The polishing machine is a power tool, and the polishing machine consists of basic elements such as a base, a throwing disc, a polishing fabric, a polishing cover and a cover. The motor is fixed on the base, and the taper sleeve for fixing the polishing disc is connected with the motor shaft through screws. The polishing fabric is fastened on the polishing disc through the ferrule. After the motor...