• December 19, 2022

Abrasive belt machines can be divided into desktop abrasive belt machines, vertical abrasive belt machines, hand-push belt abrasive machines, and dust removal belt machines. safe operation 1. Before starting the sand machine, first check whether the wheel disc and belt cover are complete and firm, and whether the sandpaper is damaged. It can be turned on after checking, and can be used after the s...

• December 26, 2022

With the development of industry and the growth of urban population,more and more pollutants are discharged in production and life, the impact of exhaust gas pollutants on the environment and people's health is particularly serious.Waste gas treatment equipment mainly refers to an environmental protection equipment that protects the environment and purifies the air by recycling or removing and red...

• January 11, 2023

Processing steps of faucet cartridge: One: precision casting cartridge. Two: machine tool processing. Three: Assembly version of the rubber ring and plastic parts. Common faucet spools have steel ball cartridges and ceramic spools. The steel ball cartridge has good pressure resistance, but the disadvantage is that the rubber sealing ring that acts as a seal is easy to wear and age quickly. Compare...

• February 02, 2023

1. Operators should operate in accordance with the operating instructions of the copper bar processing machine, and must not violate regulations to cause damage or damage to personnel and equipment. The molds and accessories of the copper bar processing machine should be kept in good condition. Familiar with the structure, performance and operation method of the machine. 2. The installation, debug...

• February 14, 2023

1. What is polishing Polishing refers to the process of processing the surface of the faucet by using the high-speed rotation of various grinding heads or hemp (cloth) wheels of the polishing machine. 2. Abrasive belt polishing grinder It refers to a grinding machine that grinds with a fast-moving abrasive belt. 3. Surface grinder It refers to the grinding machine mainly used for grinding the plan...

• November 29, 2023

1. There are few pores inside the casting, and the rigidity of the product after heat treatment can be greatly improved, even exceeding that of die-casting products. 2. The product has low density. Relying on liquid self-gravity molding, the density of low-pressure casting machine products is lower than that of die casting, and its strength is also slightly lower, but its elongation is higher. 3. ...

• January 19, 2024

Machining centers are unable to process small molds with small tools, and the cost is high. The advantage of the engraving machine is engraving, but if the hardness of the processed material is relatively high, it will be unable to do its job. The emergence of engraving and milling machines can be said to be the shortcomings of both.  The machining center can realize the centralized processin...