• August 24, 2021

SS304 is better. There are several reasons below that: 1.The hardness of stainless steel faucet is higher than that of all-copper. The service life of stainless steel faucet is longer than that of all-copper faucet. It does not need to change the faucet frequently, which is more environmentally friendly. 2.Stainless steel faucets do not contain lead, are resistant to acid and alkali, and are not e...

• September 27, 2021

Daily maintenance 1、Check the air cylinders, gas circuits and valves for leaks and eliminate them in time. 2、Clean the contact surfaces of moving parts at any time during work and add lubricating oil, such as guide sleeves and guide posts everywhere. 3、Lubricating oil filling cycle for the sliding sleeve and the lifting sliding sleeve of the box: every shift/time. 4、Frequently check whether the fa...

• October 19, 2021

50kg Ball Sand Mixer is a small-sized spherical sand mixing device with a spherical rotating throwing and falling back type. It is used for gravity casting or mixing of small and large batches of core sand. Its working principle is to quickly mix quartz sand, curing agent, and resin into casting core sand. Through the core-making equipment, high-quality sand cores with smooth surface, small gas ge...

• December 09, 2021

The brass rod automatic cutting machine is one of the main equipment produced by our factory. The feeding and feeding actions of this model are completed by the speed-regulating motor driving the corresponding mechanical parts. The feeding motor is controlled by the frequency converter. The intensity can be easily controlled. When the machine is automatically running and cutting, it will perform c...

• June 06, 2022

The pressure tester is an instrument used for pressure resistance, pressure holding test and vacuum holding pressure test with helium and nitrogen as the test medium. production workshop. Introduction Pressure tester: In the production process of air-conditioning units and fin heat exchangers, it is necessary to test the sealing performance and pressure resistance of products. Generally, the readi...

• June 13, 2022

PVC ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for fluid regulation and control. Compared with other valves, it has the following advantages. 1. The fluid resistance is small. The ball valve has the smallest fluid resistance among all valves. Even the reduced diameter ball valve has a relatively small fluid resistance. The UPVC ball valve is a ...

• January 11, 2023

Processing steps of faucet cartridge: One: precision casting cartridge. Two: machine tool processing. Three: Assembly version of the rubber ring and plastic parts. Common faucet spools have steel ball cartridges and ceramic spools. The steel ball cartridge has good pressure resistance, but the disadvantage is that the rubber sealing ring that acts as a seal is easy to wear and age quickly. Compare...

• February 02, 2023

1. Operators should operate in accordance with the operating instructions of the copper bar processing machine, and must not violate regulations to cause damage or damage to personnel and equipment. The molds and accessories of the copper bar processing machine should be kept in good condition. Familiar with the structure, performance and operation method of the machine. 2. The installation, debug...