• September 22, 2020

Valve Machine is the most automation to manufacture different types and sizes of tyre valve in the world so far. Valve processing line is our own design and is able to make finished valve body from forgings. Our machine is non-standard customized product,with these advantages just like standardized production,lowest defect rate,higher end product quality and lower labor cost. Welcome to D&...

• September 28, 2020

Brass ball valve body machine is specially for the brass valve, angle valve, gate valve machine, can finish valve in one time.D&S is a professional machine prodcuer for brass valve production. The complete production line consists of brass rod making machines, brass forging machines, CNC lathes and assembly line. Raw material→Melting furnace→Holding furnace→Traction→Automatic cutting machine→H...

• November 05, 2020

Valves are essential parts of any piping system used to control the flow and pressure of contents, whether that is oil, gas, liquid, or vapors.We are talkimg about the ball valve here. A ball valve is a quarter-turn rotational motion valve that used a ball-shaped disk to control a flow. If the valve is opened, the holes in the ball stay in line with the body inlet allowing contents to pass. Ball v...

• November 24, 2020

A Ball Valve is a quarter turn valve which can be opened or closed by applying pressure on the hollow and pivoting ball inserted into void opening. It is usually used as a switch that can control and direct the flow of fluids (including air, water, gas, oil etc.). When the hole in the ball is aligned to the flow, it is open and closed when it is perpendicular. Automatic brass ball machine carries ...

• January 20, 2021

Brass bars are rod-shaped objects made of copper and zinc alloys. They are named for their yellow color. Brass has good mechanical and wearing resistance, and can be used to manufacture precision instruments, ship parts, shell of guns, etc. Our machine could cut many kinds of products. DN32,DN50,DN60 etc. More information, welcome to contact D&S Automatic Co.,Ltd.

• January 26, 2021

Traditional faucets are made of brass. The process flow is as follows: copper ingot→dissolving→casting→cleaning after casting→casting inspection→machining→tolerance inspection→grinding→surface inspection→plating→plating inspection→assembly→pressure test→ Finished product inspection → packaging → delivery. There are a total of 16 processes, and each process is strictly controlled to ensure quality....

• March 23, 2021

Butterfly valve is a frequently used valve in industrial water system. It has become a common valve for pipelines because of its small size and high cost performance. The main products of butterfly valves are wafer soft-sealed butterfly valves and flanged butterfly valves. Although there are fewer types of butterfly valves than gate valves, there are also many differences to adapt to different wor...

• March 31, 2021

PTFE machine is a raw material belt plastic machine, it is not a single machine, it is a combination of a series of machines composed of machines with different functions. A set of raw tape equipment needs about 60,000 to 100,000 yuan. With a set of raw tape equipment, we can enter the raw tape production process, so it is relatively simple to build a raw tape factory. The main material of the PTF...