The brass rod automatic cutting machine is one of the main equipment produced by our factory. The feeding and feeding actions of this model are completed by the speed-regulating motor driving the corresponding mechanical parts. The feeding motor is controlled by the frequency converter. The intensity can be easily controlled. When the machine is automatically running and cutting, it will perform c...
A calender is composed of two or more rollers arranged in a certain form, under a certain temperature, the rubber or plastic is pressed and stretched into a film of a certain thickness and surface shape, and can be used for fiber curtain canvas or Machinery for hanging glue on steel cord. The calender can be divided into two-roller, three-roller, four-roller and five-roller calender according to t...
Primary maintenance This type of maintenance refers to the operation of the equipment for one month (two shifts), mainly by operators, and maintenance workers cooperate with each other for maintenance. Its contents are: "Take off the yellow robe", "clean the internal organs", and its main work contents are: checking, cleaning, and adjusting the electrical control parts; thoroughly cleaning and wip...
The pressure tester is an instrument used for pressure resistance, pressure holding test and vacuum holding pressure test with helium and nitrogen as the test medium. production workshop. Introduction Pressure tester: In the production process of air-conditioning units and fin heat exchangers, it is necessary to test the sealing performance and pressure resistance of products. Generally, the readi...
PVC ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for fluid regulation and control. Compared with other valves, it has the following advantages. 1. The fluid resistance is small. The ball valve has the smallest fluid resistance among all valves. Even the reduced diameter ball valve has a relatively small fluid resistance. The UPVC ball valve is a ...
Production of faucets Copper ingots→dissolving→casting (low-grade sand casting, high-quality faucet gravity casting)→post-casting cleaning→casting inspection→machining→tolerance inspection→grinding→surface inspection→electroplating→plating inspection→assembly→pressure test→ Finished product inspection → packaging → delivery. Casting: low-grade castings are cast by sand casting, high-quality faucet...
1. Operators should operate in accordance with the operating instructions of the copper bar processing machine, and must not violate regulations to cause damage or damage to personnel and equipment. The molds and accessories of the copper bar processing machine should be kept in good condition. Familiar with the structure, performance and operation method of the machine. 2. The installation, debug...
Now many factories will use some equipment to make the production of products more efficient and fast. When it comes to equipment, we have to mention a very important one, that is the fine assembly line. It can be seen in the upper part of the production line in almost every industry, but how to better maintain the assembly line in our daily life? Let it can work better for us. The following is ab...
New Blog
Copyright © 2024 D&S Automatic Co.,Ltd.. All Rights Reserved.
IPv6 network supported