• November 21, 2022

The production process of continuously casting high-temperature molten steel into a billet with a certain cross-sectional shape and a certain size specification is called continuous steel casting. The equipment required to complete this process is called continuous casting equipment. The electromechanical and hydraulic integration of steel pouring equipment, continuous casting machine body equipme...

• January 03, 2023

Processing method of copper bed slotting Side copper knife Copper knife keyway, straight groove 1: Clean and lubricate the various parts of Taiwan Xuzheng bed. Correct the direction of the vertical line between the platform and the main track. 2: Correct the pointer mouth of the tiger pointer to form a horizontal direction with the knife axis, and fix the tiger pointer on the bed. According to the...

• February 02, 2023

1. Operators should operate in accordance with the operating instructions of the copper bar processing machine, and must not violate regulations to cause damage or damage to personnel and equipment. The molds and accessories of the copper bar processing machine should be kept in good condition. Familiar with the structure, performance and operation method of the machine. 2. The installation, debug...

• March 30, 2023

1. Scope of application The faucet test machine and water nozzle test machine developed by Jinan Schmidt are suitable for the pressure test and flow test of seasonal nozzle metal bribe, room nozzle spiral nozzle, ceramic nozzle and other test pressure of 0-8 mpa (requiring higher pressure can be customized), and the test pressure and test flow are adjustable. It is suitable for factory testing of ...

• May 20, 2023

The specific working principle of the core projector Resin sand shell core method is a detailed core process, it is containing phenolic resin core sand (shell core sand) into the heated metal box, keep a certain time (5~15s), near the core wall of the core sand resin dissolution and sand bond together, along the core chamber wall with the determined thickness of the plastic state shell. After pour...

• June 05, 2023

The working principle of fiber laser is as follows: The pump light emitted by the pump source is coupled into the gain medium through a mirror. Since the gain medium is a rare-earth-doped fiber, the pump light is absorbed, and the rare-earth ions that have absorbed the energy of the photon undergo an energy level transition and achieve particle count. Inversion, the inverted particles pass through...

• September 08, 2023

An electric furnace that uses the induction electrothermal effect of the warehouse to heat or melt the warehouse. There are three types of AC power used in induction furnaces: power frequency (50 or 60 Hz), intermediate frequency (150~10000 Hz) and high frequency (10000 Hz). The main components of the induction furnace are the inductor, the furnace body, the power supply, the capacitor and the con...

• February 01, 2024

The screw air compressor is an oil-injected single-stage twin-screw compressor. It adopts high-efficiency pulley (or shaft) transmission to drive the main engine to rotate for air compression. It cools and lubricates the compression chamber of the main engine through oil injection, and the air discharged from the compression chamber The gas mixed with oil undergoes coarse and fine separation to se...