Machining centers are unable to process small molds with small tools, and the cost is high. The advantage of the engraving machine is engraving, but if the hardness of the processed material is relatively high, it will be unable to do its job. The emergence of engraving and milling machines can be said to be the shortcomings of both. The machining center can realize the centralized processin...
The reason why the slitting machine's winding always goes off track: 1. Problem of equipment deviation 2. Air leakage occurs in parts of the reel 3. Is the pressure at both ends of the reel consistent? What cannot be ignored during production is to pay attention to changes in product tension, etc. Slitting machine is a mechanical equipment that cuts wide-width paper, mica tape or film into multipl...
The overall structure of the sawing machine mainly consists of the following components: 1. X-axis sliding table: drive the saw blade X-axis direction feed; 2. Y-axis sliding table: drive the workpiece Y-axis movement; 3. Z-axis column sliding table: drive the saw blade Z-axis direction; 4, rotary table: drive the workpiece 360 degrees turn; 5, chassis: main support and connection; 6, main shaft: ...
Welding machine refers to the electrical appliances that provide certain characteristics of power supply for welding. The welding is flexible, simple, convenient and reliable, and after welding, even the same strength as the base material is widely used in various industrial fields, such as aerospace, ships, automobiles, containers and so on. Electric welding machine (electric welding machine) is ...
New Blog
Copyright © 2024 D&S Automatic Co.,Ltd.. All Rights Reserved.
IPv6 network supported