• November 24, 2020

A Ball Valve is a quarter turn valve which can be opened or closed by applying pressure on the hollow and pivoting ball inserted into void opening. It is usually used as a switch that can control and direct the flow of fluids (including air, water, gas, oil etc.). When the hole in the ball is aligned to the flow, it is open and closed when it is perpendicular. Automatic brass ball machine carries ...

• January 26, 2021

Traditional faucets are made of brass. The process flow is as follows: copper ingot→dissolving→casting→cleaning after casting→casting inspection→machining→tolerance inspection→grinding→surface inspection→plating→plating inspection→assembly→pressure test→ Finished product inspection → packaging → delivery. There are a total of 16 processes, and each process is strictly controlled to ensure quality....

• March 09, 2021

PTFE tapes are all professionally used. Non-professionals often encounter similar problems when using them, such as: how to wrap it? How many turns can be wound firmly without leaking?  In fact, how to use it correctly is often taken carelessly by people as a minor issue, but "thousands of miles of dams, destroyed by ant dens", home improvement is no small matter, and the decoration is c...

• March 17, 2021

The core shooter uses coated sand to make the core, which is suitable for both hot core boxes and cold core boxes. The core shooting machine is characterized by the use of two guide posts to open and close the mold vertically, and install two different molds at the same time. The fixed mold can be installed on both sides of the middle fixed frame, and the mold can be opened and closed (equivalent ...

• March 31, 2021

PTFE machine is a raw material belt plastic machine, it is not a single machine, it is a combination of a series of machines composed of machines with different functions. A set of raw tape equipment needs about 60,000 to 100,000 yuan. With a set of raw tape equipment, we can enter the raw tape production process, so it is relatively simple to build a raw tape factory. The main material of the PTF...

• July 07, 2021

Brass is a copper alloy with zinc as the main alloying element. According to its chemical composition, brass is divided into two types: ordinary copper and special brass. (1)Ordinary brass is a binary alloy of copper and zinc. Due to its good plasticity, it is suitable for manufacturing plates, bars, wires, pipes and deep-drawn parts, such as condenser tubes, radiator tubes, and mechanical and ele...

• August 19, 2021

1. The raw material tape needs to be wound along the thread direction, which greatly reduces the sealing performance. 2. Do not wrap all threads with raw material tape. In addition to avoiding the raw material tape from entering the pipe, it will also reduce the sealing performance. It is recommended to start winding from the second thread at the beginning of the thread, leaving the first thread o...

• August 26, 2021

The fire sprinkler system is a kind of fire extinguishing device, and it is a kind of fixed fire protection facility that is widely used. It has the characteristics of low price and high fire extinguishing efficiency. According to different functions, it can be divided into two forms: manual control and automatic control. The system is equipped with an alarm device, which can automatically send an...