Milling machine refers to a gantry milling machine that mainly uses milling cutters to process various surfaces on workpieces. Usually the rotational motion of the milling cutter is the main motion, and the motion of the workpiece (and) the milling cutter is the feed motion. Boring machine gantry milling machine, milling and boring machine and boring machine are one of them. Boring machines can al...
1. There are few pores inside the casting, and the rigidity of the product after heat treatment can be greatly improved, even exceeding that of die-casting products. 2. The product has low density. Relying on liquid self-gravity molding, the density of low-pressure casting machine products is lower than that of die casting, and its strength is also slightly lower, but its elongation is higher. 3. ...
Machining centers are unable to process small molds with small tools, and the cost is high. The advantage of the engraving machine is engraving, but if the hardness of the processed material is relatively high, it will be unable to do its job. The emergence of engraving and milling machines can be said to be the shortcomings of both. The machining center can realize the centralized processin...
The reason why the slitting machine's winding always goes off track: 1. Problem of equipment deviation 2. Air leakage occurs in parts of the reel 3. Is the pressure at both ends of the reel consistent? What cannot be ignored during production is to pay attention to changes in product tension, etc. Slitting machine is a mechanical equipment that cuts wide-width paper, mica tape or film into multipl...
The working principle of the electric forklift rear-wheel steering cylinder: The uniform liquid in the sealed hydraulic cylinder can be used to transmit force and also the principle of motion. The motion is transmitted to the working hydraulic cylinder (lifting hydraulic cylinder, tilt hydraulic cylinder and steering hydraulic cylinder through the oil). Cylinder to achieve the purpose of loading a...
The overall structure of the sawing machine mainly consists of the following components: 1. X-axis sliding table: drive the saw blade X-axis direction feed; 2. Y-axis sliding table: drive the workpiece Y-axis movement; 3. Z-axis column sliding table: drive the saw blade Z-axis direction; 4, rotary table: drive the workpiece 360 degrees turn; 5, chassis: main support and connection; 6, main shaft: ...
Welding machine refers to the electrical appliances that provide certain characteristics of power supply for welding. The welding is flexible, simple, convenient and reliable, and after welding, even the same strength as the base material is widely used in various industrial fields, such as aerospace, ships, automobiles, containers and so on. Electric welding machine (electric welding machine) is ...
1. A turntable-type rotating eight-station 14-axis special machine tool that integrates drilling, tapping and grooving. 2. The bed and accessories are made of HT250 high-quality castings. The outer body of the power head is integrally cast with QT400. It is subjected to multiple aging treatments according to process requirements to eliminate the internal stress of the frame and power head and ensu...
New Blog
Copyright © 2024 D&S Automatic Co.,Ltd.. All Rights Reserved.
IPv6 network supported