• August 01, 2022

Aluminum alloy gravity casting has low melting point and good casting performance, and is widely used in automobiles, motorcycles, motors, communications, hardware tools and other fields. Aluminum alloy has a low melting point and good casting performance. Gravity castings and low-pressure casting products are widely used in automobiles, motorcycles, motors, communications, hardware tools and othe...

• July 25, 2022

1. Install a 6-station tool holder, and the center height should be appropriate. (What kind of detection element is the 4-station tool holder, and the 6-station tool holder is also the kind of detection element, so there is no need to change the ladder diagram too much). 2. Connect the wires according to the wiring diagram. (The signals of the fifth and sixth stations should be connected to the in...

• July 19, 2022

Low pressure casting machine is a general equipment for low pressure casting of aluminum alloy, which can be widely used in the production of aluminum alloy castings in automobiles, motorcycles, instruments, textile machinery and aerospace industries. The low pressure casting machine is composed of main engine, hydraulic system, molten pool type holding furnace, liquid level pressurizing device, e...

• July 11, 2022

The abrasion resistance testing machine is used for abrasion resistance testing of leather, cloth, paint, paper, floor tiles, plywood, glass, natural rubber, etc. The working principle is to use a specific type of grinding wheel to wear the test piece under a certain load, and to evaluate the wear resistance characteristics of the test piece by the weight lost after the test piece is worn for a fi...

• July 04, 2022

Drilling and tapping machine is a metal cutting machine tool, CNC machining equipment, similar in style and function to the machining center, but smaller than the machining center, with a general stroke of 500*400. Features The drilling and tapping machine has a super-large column that is stable and can be displaced at a high speed of 60m/min without deformation. Ultra-large span base, six-point s...

• June 27, 2022

The CNC cutting machine uses a digital program to drive the movement of the machine tool. When the machine tool moves, the randomly equipped cutting tool cuts the object. This kind of mechatronics cutting machine is called CNC cutting machine. CNC cutting machines are divided into flame cutting machines, plasma cutting machines, laser cutting machines, etc. according to different cutting methods, ...

• June 20, 2022

The salt spray machine can evaluate the ability of salt spray corrosion of materials and their protective layers, as well as the process quality comparison of similar protective layers, and can also evaluate the ability of certain products to resist salt spray corrosion; this product is used for parts and electronic components. , the protective layer of metal materials and the salt spray corrosion...

• June 13, 2022

PVC ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for fluid regulation and control. Compared with other valves, it has the following advantages. 1. The fluid resistance is small. The ball valve has the smallest fluid resistance among all valves. Even the reduced diameter ball valve has a relatively small fluid resistance. The UPVC ball valve is a ...

• June 06, 2022

The pressure tester is an instrument used for pressure resistance, pressure holding test and vacuum holding pressure test with helium and nitrogen as the test medium. production workshop. Introduction Pressure tester: In the production process of air-conditioning units and fin heat exchangers, it is necessary to test the sealing performance and pressure resistance of products. Generally, the readi...