• June 06, 2022

The pressure tester is an instrument used for pressure resistance, pressure holding test and vacuum holding pressure test with helium and nitrogen as the test medium. production workshop. Introduction Pressure tester: In the production process of air-conditioning units and fin heat exchangers, it is necessary to test the sealing performance and pressure resistance of products. Generally, the readi...

• May 31, 2022

Automatic decapping machine, also known as intelligent cap opener, automatic cap opener, sample tube cap opener, its working principle is mainly the opening and closing functions of virus sampling tubes and sample tubes, and infrared sensors are used to judge sampling tubes in real time. At the same time, it sends out the command signal of opening and closing the cover, automatically recognizes th...

• May 23, 2022

Conveyor, also known as conveyor, is suitable for horizontal conveying, inclined conveying, vertical conveying and other forms of granular or powdery materials. The conveying distance varies according to different models, generally from 2 meters to 70 meters. conveying principle The rotating screw blade pushes the material for conveying by the screw conveyor. The force that keeps the material from...

• May 18, 2022

The upper roller of the symmetrical plate rolling machine is in the symmetrical position of the center of the two lower rollers through the hydraulic oil in the hydraulic cylinder acting on the piston to make vertical lifting motion, and the last stage gear of the main reducer drives the gears of the two lower rollers to mesh for a rotating motion, which is used for rolling plates. provide torque....

• May 11, 2022

Centrifugal dewatering machine is mainly composed of transfer and screw conveyor with hollow shaft. After the sludge is sent into the drum by the hollow shaft, it is immediately thrown into the hub cavity under the action of centrifugal force generated by high-speed rotation. The specific gravity of the sludge particles is large, so the centrifugal force generated is also large, and they are throw...

• May 06, 2022

The core-making method in which the sand core is rapidly hardened in the core box by blowing air at room temperature is called the cold core box method. The core-making method in which the sand core is rapidly hardened in the core box by blowing air at room temperature is called the cold core box method. Cold core box method includes: blowing amine cold core box method, SO2 cold core box method, a...

• April 26, 2022

Primary maintenance This type of maintenance refers to the operation of the equipment for one month (two shifts), mainly by operators, and maintenance workers cooperate with each other for maintenance. Its contents are: "Take off the yellow robe", "clean the internal organs", and its main work contents are: checking, cleaning, and adjusting the electrical control parts; thoroughly cleaning and wip...

• April 19, 2022

There are many types of machining equipment: 1. The common machines and equipment in machining factories are (by processing method): turning--lathe, milling--milling, planing--planer (inserting--slotting machine), drilling countersinking (huò) reaming- --Drilling, boring—boring, broaching—broaching, grinding—grinding, polishing—polishing. The above types of equipment can be basically subdivided. L...

• April 13, 2022

The automatic spraying machine can be combined with dust removal machine, leveling machine, paint baking machine and conveying table lamp equipment to form an automatic production line, and the complexity of the machine can be determined according to the number of axes of the automatic glue spraying machine. Automatic spraying machines can be divided into glue coating machines and arc spraying mac...